(Click to enlarge the photos)

1. Quick-change filter cartridge with tool-free replacement
2. Long-life cartridge filtration capacity: 3,000 Litres
3. LED reminder. A red light indicates when the cartridge is due for replacement
4. Power saving mode: the system will power-off when there has been no activity for 15 mins, and then automatically power back on when needed.
5. Silver impregnated coconut carbon removes residual chemicals like chlorine and other substances which can cause discolouration and bad odour
6. Water saving design can reduce your water bill
7. Passed cycle test where the unit is subjected to 60 ~ 90 PSI water pressure 100,000 times
8. Spare parts are tested, and all pass cycle and burst tests according to NSF test standards
9. 100% original raw material production for water contact parts
10. 100% leak tested prior to shipping
11. Made in Taiwan

1) FF-5800 On Tap Water Filter System

2) Accessories

• Warranty and return terms in: https://www.ilanwater.com.au/warranty-information

Switch for plain tap water or filtered water

• Please turn the switch to the normal position when filtered water is not required. If it is not turned off after use, it may cause the filter replacement reminder function to be inaccurate, and accelerate battery consumption.
• For first time use or after changing the cartridge, allow the water to flow for 30 seconds. It is normal to see some black material at this time due to the filter material being natural activated carbon.
• The service life of the filter may vary due to the amount of water used, water pressure, water temperature, water quality, and the amount of foreign matter present.
• Use only cold water (1-40°C) through the water filter.
• If the filter has not been used for a long time, allow water to flow for about 1 minute before consumption.
• Do not use detergents containing organic solvents to clean the water filter.
• Do not expose the water filter to direct sunlight
• Do not mount items on this water filter

• Please turn the switch to the normal position when filtered water is not required. If it is not turned off after use, it may cause the filter replacement reminder function to be inaccurate, and accelerate battery consumption.
• For first time use or after changing the cartridge, allow the water to flow for 30 seconds. It is normal to see some black material at this time due to the filter material being natural activated carbon.
• The service life of the filter may vary due to the amount of water used, water pressure, water temperature, water quality, and the amount of foreign matter present.
• Use only cold water (1-40°C) through the water filter.
• If the filter has not been used for a long time, allow water to flow for about 1 minute before consumption.
• Do not use detergents containing organic solvents to clean the water filter.
• Do not expose the water filter to direct sunlight
• Do not mount items on this water filter

Installation Procedures

The ALYA FF-5800 On Tap Water Filter will fit most standard male threaded taps, and also comes with adapters to suit female threaded (internal) taps, and unthreaded taps.

(A) Female threaded taps

(B) Male threaded taps

(C) Unthreaded taps

The ALYA FF-5800 On Tap Water Filter is not compatible with the following types of taps:

1. Remove the tap filter from the faucet.
2. Turn the end of the filter cartridge anticlockwise (arrow indicates direction) and then remove it.
3. Insert the new filter cartridge, push it all the way in and then turn clockwise to secure it.
4. Put the tap water filter back onto the faucet.
5. To reset the filter replacement warning light, use a pen or mobile sim card needle to press the small hole on the battery cover for 3-5 seconds. The orange light, red light, and green light will flash once each when the reset has been successful.
   • To avoid damage to the unit, removing it from the faucet prior to replacing the cartridge is recommended.
   • After changing filter cartridge, allow the water to flow for 30 seconds or until no black particles are present.
   • When the filter cartridge expires or when water flow rate is reduced, the filter cartridge needs to be replaced.

1. Use a coin and insert it into the battery cover slot.
2. Turn the cover anticlockwise a quarter turn (arrow indicates direction) and then remove it.
3. Pull out and remove the battery.
4. Insert the new battery positive side (+) up
5. Replace the battery cover and turn from the unlocked symbol to the locked symbol until the arrows are aligned

• Part No: FF-20UF
• Long-life cartridge filtration capacity: 3,000 Litres
• Hollow Fibre + Silver impregnated coconut carbon filter cartridge, 2 units/box