Information

• EZ-AQUA 250B/BU water purifiers are intended for use in suburban households where water is treated and supplied by municipal water authorities.
• If the water source is not treated sufficiently, the effective life span of the filters of EZ-AQUA 250B/BU may be shortened and more regular replacement may become necessary.
• For commercial venues, including restaurants, cafés, hotels, etc., EZ-AQUA 250B/BU filters may be overloaded and require more regular filter replacement.
• Suggested filter replacement timing is based on normal household usage under normal suburban water quality and conditions. Any deviation will need to be considered for the timing.
• If the filters are not replaced on the suggested timing and usage, the effectiveness of water purification and water safety may be jeopardized.
• For the installation of the undersink purifier, use electrical tools carefully as water is conductive and electric shock or electrocution risks exist. For drilling on the sink, it is recommended to use cordless drills.
• Based on the conditions in the sink area, wear protective gears when installing the undersink purifier.
• While EZ-AQUA 250B/BU is pre-assembled with parts and is quite easy to install by DIY, check with your local councils for regulations on whether licensed trade people only are allowed to do even minor work over domestic water supply.
• Failure to follow instructions in this manual may void warranty.

EZ AQUA 250B is pre-assembled with tubing and parts for it to be mounted on the side, or simply seat on top, of a kitchen bench next to the kitchen sink. With an inlet faucet valve attached to the existing faucet aerator, you get the filtered water from the outlet faucet. When installed, cold water flows from the existing faucet aerator through the 3 stages of filtration to be ready for consumption at the outlet spout.

Each of the three filters removes impurities, chemical and microorganisms and improves the taste as shown in the diagram below: